How to Make a Strike Through Thicker in Powerpoint TUTORIAL

How to Make a Strike Through Thicker in Powerpoint

Formatting Line Weight and Thickness for Shapes in PowerPoint 2013 for Windows

Modify the weight attribute of shape outlines in PowerPoint 2013 for Windows. PowerPoint lets you create thin or thick lines, and compounded lines that combine two or three lines, and more than.

---

Writer: Geetesh Bajaj

Product/Version: PowerPoint 2013 for Windows

OS: Microsoft Windows 7 and higher

Appointment Created: November 13, 2013
Terminal Updated: November 13, 2013

Learn PowerPoint

Learn how and why you lot should be Hiding Slide Titles in PowerPoint.

Nosotros take explained the basics of formatting shape outlines in PowerPoint 2013. Now we take you further ahead to explore how y'all can change line weight to make the outlines thinner and thicker. So why would you desire to change the weight of an outline? There are many reasons, more often than not, you lot may want a line that's almost invisible or very sparse, this lets your audience focus on other areas. At other times when you desire the attention of your audience to focus on a particular line, then you can do so by increasing its weight. In this tutorial, we will also encompass compound lines such every bit those that encompass double or triple lines.

Weight is the thickness aspect of the shape outline. You tin can change the weight all the way from a hairline thin line to a mesomorphic thick line. Figure 1 shows you lot some weight variations in outlines.

Figure 1: Width (weight) variations in outlines

Follow these steps to change the outline weight of a shape:

1. Open your presentation and select the shape that you want to format.
2. Alternatively, if yous want to start from scratch, launch PowerPoint. Most of the time, PowerPoint volition open with a new slide in a presentation, you tin change the slide layout to Blank past selecting the Habitation tab | Layout | Bare option. Then, insert a shape and select it.
2. Nosotros selected a Rectangle shape, as shown in Figure 2. Selecting the shape brings upward the Drawing Tools Format tab in the Ribbon, every bit shown highlighted in red inside Figure two. Activate this Ribbon tab past clicking on information technology.
3. 
   Figure ii: Drawing Tools Format tab of the Ribbon

Notation: The Drawing Tools Format tab is a Contextual tab. These tabs are special tabs in the Ribbon that are not visible all the time. They only brand an appearance when y'all are working with a particular slide object which can exist edited using special options.

3. Within the Cartoon Tools Format tab, click the arrow part of the Shape Outline button (highlighted in reddish within Effigy 3). This bring up the Shape Outline driblet-down gallery, as shown in Figure 3. From the Shape Outline drop-down gallery, choose Weight to bring up the Weight sub-gallery, as shown in Effigy 3.
4. 
   Figure 3: Shape Outline drop-downward gallery
5. Within the Weight sub-gallery, cull any weight (thickness) value for the selected shape. Or choose the More Lines as shown highlighted in blueish within Figure 3, to a higher place.
4. This opens the Format Shape Task Pane that you tin run into in Figure 4. Brand sure that the Fill tab is selected (highlighted in red within Effigy four), then select the Line options. Within this section, select the Solid line radio button (highlighted in blue within Effigy four).
5. 
   Figure 4: Format Shape task pane with Line options
6. The Format Shape task pane provides lot of options to format the line, merely we will only explore options related to the weight attribute on this folio as marked in Figure four, above:

A. Width

7. Adds a weight for the selected line in points. You can opt to create a really thick line, even 100 pt or more! Notwithstanding, choose something that works best for y'all. Yous can either blazon in the outline width in the box, or use the up and down arrow buttons in the command to arrange the outline width. You volition see an immediate preview within your selected shape on the slide.

B. Compound type

8. Selecting this option reveals a driblet-downward from where you tin can cull any of the compound types available for outlines, every bit shown in Effigy v. Note that compound lines in PowerPoint are limited to two or three lines compounded to each other. You demand to cull the compound line options that PowerPoint provides and cannot create your own custom compound line.
9. 
   Figure v: Compound types for outlines

C. Dash type

10. This option allows you to apply nuance attribute to the shape outline. Larn more than about Formatting Outlines for Shapes (Dashes) in PowerPoint 2013 for Windows tutorial.

D. Cap blazon

11. This allows you lot to choose between a Square, Round, or Flat line end blazon, equally shown in Figure 6. This option but works with outlines within open shapes. Also, if you apply this option to a dashed line, it influences all private dashes inside the line.
12. 
    Figure six: Cap types

Eastward. Bring together type

13. This allows you to cull betwixt Round, Bevel, and Miter joins, as shown in Figure 7. This influences the joins in an outline such equally a corner of a triangle or rectangle.
14. 
    Figure 7: Join types

F. Arrow settings

15. Pointer settings work just with outlines used as open up shapes. We have covered this in our Formatting Arrows (Arrowheads) in PowerPoint 2013 tutorial.
5. Later on choosing required shape outline attributes you tin see the changed shape outline, as shown in Figure viii. Note that the Rectangle shape which was selected before with outline weight increased to 6 pts.
6. 
   Figure eight: Shape with outline weight inverse
6. Don't forget to save your presentations oftentimes.

---

See Also:

Shape Lines: Formatting Line Weight and Thickness for Shapes (Glossary Page)

Formatting Line Weight and Thickness for Shapes in PowerPoint 2016 for Windows
Formatting Line Weight and Thickness for Shapes in PowerPoint 2016 for Mac
Formatting Line Weight and Thickness for Shapes in PowerPoint 2011 for Mac
Formatting Line Weight and Thickness for Shapes in PowerPoint 2010 for Windows
Formatting Line Weight and Thickness for Shapes in PowerPoint 2007 for Windows

You May As well Like: How to Make Your Presentation Wing | Starfish PowerPoint Templates

---

Popular Posts

This is the original page. An AMP (Accelerated Mobile Folio) version of this page is also bachelor for those on mobile platforms, at Formatting Line Weight and Thickness for Shapes in PowerPoint 2013 for Windows.

---

Microsoft and the Office logo are trademarks or registered trademarks of Microsoft Corporation in the United states of america and/or other countries.

Plagiarism will be detected by Copyscape

DOWNLOAD HERE

How to Make a Strike Through Thicker in Powerpoint TUTORIAL

Posted by: jillclont1941.blogspot.com